The equipment can be set after CAN device, change single cable bus to redundant bus, also can change the redundant cable to non-redundant cable, meanwhile featured Opto-isolation, reducing interference and other functions. Products designed as industrial class, IP30 protection grade, wave pattern aluminum casing, 35mm DIN rail installation, DC (9-36) V, widely power input, featured relay alarm output, dual power redundant, isolation protection and other advantages.
ƒÜ Support 3 channels of independent CAN bus, include CAN2.0A and CAN2.0B, 32 kinds of pre-communication rate.
ƒÜ DeviceNet¡BCANOoen bus support DIP switch manually set all the standard rates or rate adaptive
ƒÜ 6 pcs of LED status indicators with dual-color, power fault relay output alarm.
ƒÜ Electric interface 4000V thunder-proof, 1.5A overcurrent protection, 600W surge protection. Industrial design, EMC test certificate.
ƒÜ DC9-36V wide temperature redundancy dual power, reverse connection protection.
ƒÜ IP30 protection grade, wave pattern aluminum enhance case; adopt standard industrial 35mm Din Rail installation.
„« 3 pcs of 5pin port, conform the CiA organizational recommendation.
„« Support CAN BUS/DeviceNet/CANOpen bus standard.
„« Communication Rates: DeviceNet/CANOpen all and normal used rate grade, up to 1M.
„« Have the protection function of 4000V anti-lightning,1.5A over-current and 600W surge-proof.
„« Terminal Resistance: the equipment without terminal resistance, please use the external one when necessary.
Power and Protection:
„« Power: dual power redundancy input, DC¡]9-36¡^V, typical DC24V, power consumption less than 4W, has DC1500V voltage isolation and reverse protection, industrial terminal interface.
„« Relay alarm output: optical fiber link failure and power error alarm output, maximum capacity of contacts: DC48V/1A, industrial terminal interface.
„« Dimensions: 132mm¡Ñ105mm¡Ñ52mm
„« Casing: IP30 protection grade, wave pattern aluminum enhanced casing.
„« Installation: 35mmDIN rail installation.
„« Net weight: 800g