Creative AVDA 1004 is a one input, four-output Video distribution amplifier with unbalanced stereo audio on RCA connectors. With >200 MHz video bandwidth, this DA features Unity gain. For compensation of signal level loss that occurs over long cable runs. Individual buffers and amplifiers ensure that all output channels are equivalent in terms of signal strength and integrity to the original input signal. AVDA 1004 is designed to provide signal distribution and amplification for the professional Audio Video market - to meet specific system requirements for distributing multiple outputs from a single input. It provides increased system flexibility and performance. Compatibility AVDA 1004 is compatible with NTSC, PAL, and SECAM video signals, allows cable runs of 1,000 feet (300 meters) or more, depending on the quality of the cable used. Technical Specifications AUDIO VIDEO DISTRIBUTION AMPLIFIER MODEL AVDA 1004 INPUT VIDEO Number/signal type 1 Composite Video Connectors 1 Female RCA Nominal level 1 Vp-p for Composite Video Minimum / maximum levels .6 Vp-p to 2.5 Vp-p Impedance 75 ohms Sync PAL; NTSC 4.43 / 3.58; & SECAM INPUT AUDIO Number/signal type 1 Stereo Connectors 2 # female RCA (For L / R) OUT PUT VIDEO Number/signal type 4 # Composite Video Connectors 4 # Female RCA Video Gain UNITY Sync PAL; NTSC 4.43 / 3.58; & SECAM OUT PUT AUDIO Number/signal type 4 # Stereo (L/R) Connectors 8 # Female RCA (Two L/R for each channel General Dim. H 2 inch X W 10 inch X D 7 inch Power Supply 220v AC / 50hz Enclosure Metal (Powder Coated)