Material: PO/ PES/ PA/ PU Size Available: Thickness: 0.08/0.10/0.12/0.15/0.18 mm Width: 48 cm Melting Temperature: 120-150 ¡æ (depends on the thickness and material of the items you want to glue). Application: 1. Iron on the hot melt on the back of the embroidery patches (please note: DO NOT REMOVE THE SILICONE RELEASE PAPER ON THE BACK OF THE ADHESIVE FILM IN THIS STEP). 2. Tear off the silicone release paper, put the embroidery patch which is already attached adhesive film onto the garment, heat it again, then the patch will be tightly glued to the garment. Characteristics: 1. Highly elastic and sticky, can be widely applied in a variety of ranges. 2. Non-toxic and does not contain the harmful element for human body.