MTP is used for conveying cooling liquid,lubricating liquid and condensation water of machine tools,industrial cleaning equipment or other cases that application of immerged pump is suitable,and is applicable to various temperautre,flow or pressure ranges.MTP is applicable to low-corrosive liquid.Concretely,it is applicable to electric spark,lathe,grinding machine,processing centre,cooling devices,industrial cleaning equipment,filtering system etc.Operation Conditions:1.Thin,clean non-explosive liquid with without soild grains and fibres,can be used for conveying of water,cooling water solution and cutting lubricating liquid.2.Liquid temperature:Normal temperature type:-15¡æto +70¡æ£»Warm water type:+70¡æto+120¡æ. MTP is non-self priming multistage centrifugal pump install with standard motor.The motor shaft is directly connected with the pump shaft through coupling.According to the requirement,the pump can be equipped with intelligent protector,which effectively protects pump from dry rotation,phase lack,overload etc.In order to meeth the requirement of installation depth of the water tank or vessel,it is possible to install cavity body for changing length of the pump.Length for different number of stages is shown in the dimensions & weight table. The motor is fully-sealed,air-cooling standard motor,2 poles.Motors for other voltages can be supplied according to the requirement.Applications:Machine tool cooling pump is a new pump that combines vertical installed motor and single-stage centrifugal pump in one.It has many advantages,such as aesthetic shape,small size,low noise and strong capacity of overloading.This pump is applicable with 50HZ or 60HZ for any frequency and any voltage.Meanwhile,we alos can produce the humid tropics machine tool cooling pump in accordance with the requirements of customers.