1. Description of Addition cure silicone rubber for cake molds: E-625 is with the all the advantage of rtv-2 condensation cure silicone rubber, but is also featured with lower shrinkage and low viscosity, good fluidity; Without releasing any by-product with low molecular weight, and it's cured from top to bottom, from the inside and outside simultaneously, so it will be deeply-cured. The E sereise addition cure silicone will not meet the problem of degradation or sticky molds because of the existence of by-product of small molecules under certain conditions, (such as closed, high temperature).it's very suitable for all kinds of mold with a variety of sizes, shapes and large sized plaster, cement,ect molds making. 2. Advantage of Addition cure silicone rubber for cake molds: E-625 is also featured with lower shrinkage and low viscosity, good fluidity; Without releasing any by-product with low molecular weight, and it's cured from top to bottom, from the inside and outside simultaneously, 3. Applications of Addition cure silicone rubber for cake molds: E-625 can be used in not only the field of common RTV-2 mold making silicone. As the vulcanizing reactions of addition cure silicone is fundamentally different from tin cure silicone¡¯s, it has no problem of deep vulcanize or reverse reaction, ect. problem. Therefore, our addition cure silicone is particularly applicable for food molds. It features with lower viscosity, high strength , good fluidity, can also be very suitable for precision complex pattern of the original copy. Any further information pls feel free to contact with Ms Alice ( Sales manager) TEL: 0086-755-89948294 Fax: 0086-755-89948030 Mobile: 0086-13510188049 E-mail: alice(at)szrl(dot)net Website: www(dot)szrl(dot)net