Features Fiber core can be display clearly Single X or Y view and X & Y view simultaneously Auto check quality of cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color LCD monitor with clear digital image display Simple Operation menu Specefications Model KL-280 Applicable fibers SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) Fiber cleaved length 8~16mm£¨Coating diameter£º250µm£© 16mm£¨Coating diameter: 250 ~ 1000µm£© Fiber diameter Cladding diameter£º80 ~150µm Coating diameter£º100~ 1000¦Ìm Fiber Count Single Fiber aligning method Core aligning Return loss £¾60dB Actual average splice loss 0.02dB £¨SM£©,0.01dB (MM), 0.04dB (DS),0.04dB( NZDS) Splicing mode auto Splicing mode 12(templet), 188(user) Typical Splicing time Typical 9 sec£¬with standard SM fiber Protection sleeve length 60mm, 40mm and a series of micro sleeves Storage of splice result 5000 results£¬3 parameter per result Tension test 2N Fiber display and magnification 400X£¨X or Y view£©,200X£¨X and Y view£© Tube heating time Typical 30 sec Electrode life 2500 No.of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner Li-battery Display screen 5 inch color LCD monitor Image change over The fiber image is turned upside down Terminals RS 232 Operating condition 0 ~ 5000m above sea level,0 ~ 95%RH and -10¡«50¡æ,respectively,Max. wind velocity of 15m/s Power supply AC 100-240V with AC adapter;inner Li-battery(6600mAH) Dimensions 150mm(L) x150mm (W) x160mm (H) Weight 3.52 Kg including battery