The pump are recommended for clean waterand fluid which are not chemically agressive to the pump components, mainly used for civil,industrial and agricultural applications, where they make the most of the sturdiness and dependability.They are manufactured to EN 733-DIN 24255 standards.Overall dimensions,size and positions of suction and delivery openings,support feet and performance comply with these standards.The E structural shape allows dismanting without disconnecting the pump body from the pipeline(back pull out),making them easy to use in widely varying conditions.They should be installed in a covered area,protected against weather.Performance Range:Flow rate up to 6200l/min(372m3/h).Dynamic head up to 112m(367feet).Operating Limits:Suction lift up to 7m;Fluid temperature up to +60¡æ.Maximum ambient temperature:+40¡æ.Max operating pressure:15bar.Special Features on Request:AISI316 stainless steel motor shaft,mechanical seal with different materials.Protection:IP55.Other voltages:Frequency:60HZ,for higher temperature pumped liquids,for use in areas wiht a higher temperature.Motor:The pumps are coupled to an asynchronous,high efficiency XINHONGJI induction motor of suitable size,which is quiet,closed and externally ventilated,suitable for continuous duty. Insulation:B.Motors require an adequate external motor protector and connections are to be according to current standards. Protection:IP44. Structural characteristics:Pump body:cast iron,manufactured to EN 733-DIN 24255 and UNI 7467-DF E-44-111 standards, built with flanged suction and delivery openings(UNI2236Pn10).Pump body cover:cast iron which closes the rear pump body and houses the mechanical seal. Impeller:cast iron.Motor shaft:AISI 304 stainless steel.Mechanical seal:ceramic and graphite.